Liquid Container Pallets

Drip Tray Pallet

Back Stoppers

Back Stoppers are a basic engineering control for the usage of Adjustable Pallet Racking, it allows the forklift driver to know when it is at the end of the usable overhang. Without this the pallet might have a tendency of being seated too far into the rack making it a hazard for that pallet to potentially fall through the beams. This can be totally eliminated by integrating this into the Adjustable Pallet Racking system, being completely modular it can be installed and removed as and when reconfiguration is required.

Advantages:

• Modular design allows for customisability through the usage cycle
• Safety provision to eliminate pallets falling through racks
• Cost effective fundamental building blocks for warehouse storage safety

Wire Mesh Decking

Wire Mesh Decking was created for the fundamental purpose of distributing the laden weight across the beam rather than point load of any certain area. In addition the usage of Wire Mesh Decking allows for a varied size of pallets to be used on a standardised Adjustable Pallet Racking depth.

Many warehouse owners have experienced pallets breaking in the middle therefore creating a difficult retrieval situation not to mention the disruption of work. Wire Mesh Decking do help to eliminate this entirely from the equation by supporting the pallet and creating a platform of which the pallet sits on.

Advantages:

• Inverted struts eliminate dust accumulation
• Distribution of weight across beam levels
• Elimination of pallet breakage whilst storage on racking systems

Loading Capacity : 1000-2000KG

Upright Protector

Upright Protectors are relatively new to the market and all round great solution to protect your Adjustable Pallet Racking System from being damaged in the long run. A low cost solution which was designed to absorb, distribute and dissipate the force or impact from the manual handling equipment. Cost effective consumable product that can be changed once damaged.

Adopted into many warehouses as a preventive measure from drastic damages. Do drop us an enquiry to see how we can make your warehouse a safer one.

Advantages:

• Low cost
• Ease of installation
• Holistic protection from small to medium impacts

Very Narrow Aisle Racking System

Very Narrow Aisle Racking System takes cues from the Adjustable Pallet Racking System but lowers the aisleway size by almost half. The narrower aisle makes the storage volume more dense as compared to conventional Adjustable Pallet Racking System. The heights Very Narrow Aisle Racking can reach is slightly higher due to the purpose built VNA Truck, some can pick from a height of 20 meters. Rail or Wire guided trucks allow for precise movement between aisleways.

Very Narrow Aisle Racking systems are becoming more common these days as it truly is a fantastic way to save cost while storing abundant amount of pallet locations.

Advantages:

• Dense storage with an increase of up to 40% compared to conventional solutions
• Increased height allowing for more space utilisation of warehouse
• Cost effective storage solution, floor space savings
• Aisleways start from 1.6 meters onwards

Loading Capacity : 1000-3000KG

Pallet Flow Racking System

Pallet Flow Racking System uses a combination of gravity and angled casters rails. Pallets are fed from the rear of the system and it flows to the front for retrieval. This system is well suited to FIFO (First In First Out) goods workflow which can be used in the Drinks Industry and buffer storage for manufacturing facilities.

Thanks to the automated braking system, when pallets are loaded onto the tracks they will be slowed down towards the retrieval end for a safer retrieval sequence.

Advantages:

• Dense storage capability which utilised 40-60% less floor space
• First In First Out (FIFO) workflow
• Lower aisleway requirements which only requires two forklifts for storage and retrieval

Loading Capacity : 1000-3000KG

Drive In Pallet Racking Syste,

Drive In Pallet Racking is a unique purposed built system with LIFO/FIFO & batch driven production in mind. The Drive In Racking System is a high density storage solution which maximises the height and space allocated by the reduction of forklift operating aisleways.

Pallets are placed one behind the other on the pallet rails with retrieval being on one end or frontal and rear entry. Retrieval and storage is extremely simple, drive the reach truck or forklift within and retrieve the pallet by lifting and reversing out of the rack.

Advantages:

• Customisability for tailored fit of items stored
• Modular rails and amrs allowing for height changes as business progresses
• Dense Pallet Storage
• LIFO & FIFO

Loading Capacity : 1000-3000KG

Double Deep Pallet Racking System

Double Deep Pallet Racking Systems utilise the fundamental design of the Adjustable Pallet Racking System with its uber modular design for holistic customisation. The Double Deep Pallet Racking System has some tricks up it’s sleeve by eliminating aisleways and creating more pallet locations. This is possible with the integration of a Pantograph Reach Truck / Forklift allowing for seamless retrieval of the pallets stored in the rear of the system.

The nature of the system allows for an extremely dense pallet storage quantity and does especially well for batch production with FIFO & LIFO processes.

Advantages:

• Customisability for tailored fit of items stored
• Modular beams allowing for height changes as business progresses
• Dense Pallet Storage
• LIFO & FIFO

Loading Capacity : 1000-3000KG